This TOP6515-AI chassis is suitable for computer configuration requirements for big data, machine vision, and deep learning. The chassis is 4u high, with 15 hard drive bays and 11 expansion slots to accommodate E-ATX motherboards and supports 4u ATX power supplies. The hollow design of the front panel, side panel and rear window of the server chassis with five 120mm and one 80mm fans makes the chassis have an excellent cooling system.

Deep learning and AI technologies are taking over every area of the world - autonomous driving, drones, virtual assistants, precision medicine, auto-generation, customer service, internet security, and more. AI brings both opportunities and challenges to the development of all walks of life. To take full advantage of AI technology, data is collected, modules are optimized, and programmed to match the respective target needs. However, due to the lengthy development process of deep learning and repeated modeling training, Toploong has designed a series of AI artificial intelligence mainframes to support dual-channel E5, 4-way GPU, Supermicro motherboard and 1800w power supply to make artificial intelligence mainframes.

Product Specification：

The importance of the case to the computer

The case is one of the most important parts of a computer, but many users choose a case as long as it looks good. However, with the continuous upgrading and changes of chassis materials and functions, many users, especially DIY users, begin to take the choice of chassis seriously. This is illustrated by the hot sales of some famous brand mid-to-high-end products. Many mid-to-high-end chassis focus too much on details such as appearance, material, and craftsmanship, but seldom mention some important design issues, which are often the shortcomings of chassis products.

Therefore, many users now choose the case first to look at the appearance, and then focus on the material of the case, the interior space design, etc. So how can our users choose a good case?

The current chassis is generally made of galvanized steel. The reason for galvanizing the steel plate is mainly for anti-corrosion. When the surface of the galvanized steel sheet is damaged and the inner iron surface is exposed, since zinc is more active than iron, according to the chemical battery principle, zinc will oxidize before iron, thus protecting the iron layer from damage, and good plating Zinc steel sheet, should be off-white matt.

Some cheaper low-cost chassis use inferior tin-plated steel plates, which generally have a thin and uneven coating. Especially for tinned steel plates, when the tin layer is not damaged, everything is fine, but once the tin layer is damaged, because tin is an inactive metal, the damage speed is even faster than that of pure steel plate painting. Inexpensive chassis often cut corners in order to save costs, which is easy to cause insufficient strength of the entire chassis and easy to deform the motherboard. The thickness of the side panel of the cheap case is not up to standard, which is easy to cause resonance between the case and the fan. In the installation environment, the host always makes some noise. This is a kind of resonance formed when the side panel of the case is too thin and the fan rotates. There is a noise.

Advantages of aluminum alloy chassis:

Under the same thickness, aluminum alloy is stronger than steel, so the chassis made of aluminum alloy is lighter in weight and higher in strength than steel chassis. Some high-end cases tend to like to use aluminum alloys. But aluminum alloys are not omnipotent, and aluminum alloys also have some places that are not as good as steel.

Disadvantages of aluminum alloy chassis:

Its elasticity is not as good as that of steel plates. If it is severely compressed, it will be easily deformed, and this deformation is difficult to repair. Therefore, aluminum alloy chassis is not suitable for use in complex environments. Secondly, although aluminum alloy has good anti-oxidation ability, its anti-oxidation principle is actually the same as that of galvanized steel plate. The biggest enemy of its surface layer is acid-containing solution. If you pour liquids such as beverages on it, it may cause appearance. Influence. The surface of aluminum alloy is not scratch-resistant. Once scratched, it will leave indelible marks on the surface, and it is difficult to repair.

Aluminum alloy materials have better heat dissipation capacity, but after all, the chassis is not a heat sink, and it only has practical significance when the temperature difference between the inside and outside is relatively large. Therefore, the actual meaning of small chassis such as barebones may be greater, and the current aluminum alloy chassis is relatively expensive due to material problems, which is generally affordable by ordinary consumers.

To sum up

We have 4U AI server case 15 HDD BAYS PC CASE 19 INCH INDUSTRIAL COMPUTER CASE for sale, for more information, plz contact us at any time.

Questions:                                                                               

Q1: Can you put my brand name (logo) on these products
A1:  Yes,.We can support OEM/ODM service, the process of customization is following:
         1:provide your specific requirement.    2:our design engineer draw the design draft.
         3:you confirm the design draft.             4.we start produce it.

Q2: What payment method do you accept?
A2: T/T,Western Union,PayPal.

Q3: What is the Minimum Order Quantity(MOQ)?
A3: We can sell one piece sample for your test.

Q4: What is the lead time of your products?
A4: 3 days for one sample, 15 working days for a large quantity.

Q5: Will it be ok to run the device 24 hrs a day 7 days a week, just like a desktop pc? will it be overheated?
A5: There's no problem with running the device 24/7. I've done it for about a month and have had no problems. Just set your monitor to sleep when you're not using the computer.

Q6: How does your factory do related quality control?
A6: Quality is top priority. We firstly check the motherboard quality after manufacturing, secondly check the computer before storage in warehouse and thirdly check before shipping out.

Q7: What’s the warranty of motherboard or MINI PC?
A7: Non-artificial damage,1 years warranty,the second year and the third year,
   we can repair it free. but we will charge for the parts that need to change.

Q8: Are you a factory or trading company?
A8: We are the professional consumer electronics manufacturer which located in SHENZHEN, China

Q9: If we come to China, can you arrange the visiting to your factory?
A9: We warmly welcome and look forward to your visiting to our factory at any time.

 CONTACT US: